10-24 TOYOTA 4RUNNER LED FRONT FOOTWELL KIT DUAL OUTPUT
From $120.00
To $120.00
PER KITIn stock
YEAR WARRANTY
DESIGNED IN USAGet the look and feel of a modern luxury vehicle. Footwell lighting gives a sense of spaciousness and comfort while providing illumination to the darkest areas. Adding light to both driver and passenger footwell areas is easy with a VLEDS 4Runner footwell kit!
Dual Output The PWM dimmer module allows for two output modes depending on the scenario.
- COURTESY MODE: The lights are at full output (200LM per side) when the door is open and fades out with the map and dome light when the door is closed.
- NIGHT MODE: This gives you an adjustable low output light when the door is closed, and the parking or headlights are switched on. This drops the output to approximately 10LM on the lowest setting. If you want it brighter use the included screwdriver and turn it up to your liking.
Plug-n-Play No splicing or tapping into your factory wires! The Redside Electric OEM-style breakout harness simply plugs into the A-pillar wiring harness. From there, connections are easily made to the PWM module and two striplight bars. For more detailed instructions, see the instructions tab.
5X Brighter The striplight bars are small in size but produce a huge amount of light compared to cheap flexible strip lights that are ten times the size. No plastic or fiberglass parts here! The circuit boards are aluminum metal core PCBs housed in a CNC'd aluminum (not cast) body, then finished with a high-quality exterior-grade black anodizing. They not only look amazing, but they will last you for years!
ATTENTION! Not compatible with 2022+ Multi-Terrain Monitor equipped models.
Rear add-on kits are also available. See our recommended products below.
| Easy Install | Plug and play OEM-style breakout harness (installs behind driver a-pillar) |
| Aluminum | Beautifully CNC'd all-aluminum body striplight bar with satin black anodized finish |
| Driver | Built-in current limiting resistor and diode protects the strip from reversed polarity installation |
| Connections | Over-molded 2 pin connectors for easier installation and better reliability |
| Mounting | Super-strong 3M double-sided tape for mounting |
| Proprietary | 21x 3014 chips mounted to on an aluminum PCB that match all VLEDS LED bulbs |
| Output (Each) | 400LM TOTAL |
|---|---|
| Current Draw @ 14.4V | 0.5A |
| Operating Voltage | 12-18V |
| Light Source | 3014 Proprietary Chip |
| Driver Style | Resistors |
2x BAR_21 LSE VHB Tape for Smooth Surfaces
1x VLEDS High/Low PWM Dimmer
1x Dimmer LSE Mounting Tape
1x PWM Adjustment Screwdriver
1x Redside Electric OEM-style Breakout Harness
1x Triangle Pry Tool
1x 4 Foot Wire Extension
8x Small Zip Ties
Which color should I choose?
Color temperature is primarily a style choice, but the human eye does perceive a whiter light as being brighter. The image below shows a side-by-side comparison of our six choices. 5000K is natural white, 5500K is pure white, and 6000K is white with a tint of blue. As for the color options, Aqua is a very close match to the backlighting of the buttons and switches. Blue is a deep true blue, and of course, Red is a vibrant rich red. Choosing a color is ultimately it's up to you depending on your lighting goals. The higher Kelvin number DOES NOT mean the light will be brighter, in fact, it is quite the opposite. The higher the Kelvin the lower the output.
Will the color match my off-brand LED bulbs?
It's nearly impossible to get an EXACT match in color temperature because of variations in the manufacturing of LED products. The only way to make sure that you get a perfect match between products is to purchase all your LEDs from us as we have the highest standards in color temperature accuracy.
Many online retailers sell standard off-the-shelf LED products, and the options can be overwhelming. Here are ten reasons you can trust us with your LED lighting needs.
1. Our Brand
We design and develop our products in-house. We are not a traditional reseller. We employ designers, mechanical engineers, and electrical engineers. Fitment, color, performance, and reliability are essential, allowing us to provide you with the best products possible.
We accept PayPal, Affirm, and all major credit cards.
2. Established Company
We've been in business for 19 years and have built an excellent reputation among automotive lighting enthusiasts. We are trusted and recommended by car and truck guys worldwide.
Life gets busy, so you've got time with our 60-day return policy.
3. Excellent Customer Service and Technical Support
We pride ourselves on offering first-class support to our customers. When you call or email us, you're talking to a person with years of knowledge and experience in the industry.
Same-day processing of replacement item by 2 pm PST. You are not required to ship the item back to us. See details HERE.
4. 25+ Years Combined Experience
Our staff is extremely knowledgeable and works firsthand with our products, from concept to installation. They know the ins and outs of every product we sell.
We make an LED replacement for nearly every bulb on your vehicle. We have several options and price points in many categories to meet your needs. Everyone has different tastes in color, so we offer up to 3 different kelvin ratings in our white LEDs, whereas the other guys only offer one.
5. Low-Cost, Flat-Rate Shipping
We have a fast, efficient pick-and-pack system with barcode scanning. Your order will be accurate and well-packaged for safe delivery to your door. Our shipping team provides you with order communication every step of the way.
Designed with the user in mind:
-
Simple navigation with a year make model bulb finder ensures you get the right part for your application
-
Clear and quality product photos so you know exactly what you're getting
-
Informational product descriptions
-
Specs and data on nearly every product
-
Install guides for the more complicated items
