YEAR WARRANTY
DESIGNED IN USA
Description
V35 Monochrome Series The new leader in high-performance automotive LED lighting. With a stunning design and even better performance, the V35 is not your run-of-the-mill LED bulb.
Beam Pattern The ultra-thin 1.5mm Copper Core PCB provides a near back-to-back mounting surface for the HP 3570 chips, resulting in the most focused, crisp beam pattern ever produced by an LED bulb.
Fitment The V35 is smaller and easier to install, ensuring a perfect fit and superior performance. The clever multi-position removable collar design allows easier installation and bulb indexing for a perfect beam pattern.
No Flicker DRL Designed specifically for vehicles with a PWM DRL/High Beam. After years of development, we have addressed and solved the issue of flickering and full-output LED lights when the DRLs are on! Not only did we fix the flicker, but we also maintained a fully functional high output high beam, measuring a whopping 7000LM total output. Our system is the first Dual-Output, High-Performance LED DRL/High Beam for Toyota and Lexus vehicles with a Pulse Width Modulated DRL system.
How it Works When a PWM input is detected by the switcher's smart voltage sensing circuitry, the output voltage is then controlled at a set parameter to the V35 bulb to get the perfect output for DRL use. It's not too bright during overcast days or dusk and not too dim in direct sunlight. The DRL lumen level was so important to us that we did extensive on-road testing to find the perfect amount of output. There are so many products on the market that are either too dim, and you lose your high beams, or they are too bright, running at full output, and blind oncoming traffic.
Easy to Install With just a few connections and a little wire routing, you'll have the kit installed in no time. We have provided detailed instructions on how to install it (see the instructions tab). Everything you need is included in the kit to get that professionally installed look.
Highlights
-
Unoffensive 400/3500LM output.
-
No flicker DRL
-
Ultra-thin, 1.5mm copper core PCB for optimal light output and a focused, crisp beam pattern.
-
The HP 3570 chipset with higher output and less heat. Dedicated thermal pad for direct transfer from chip to PCB.
-
Dual square copper heat pipes significantly increase contact surface area, enhancing efficiency in thermal management: enhanced conductivity and superior thermal efficiency with a copper-plated internal heat sink.
-
12000 RPM Whisper Flo fan with a near-silent 55 dB operation.
-
Over-molded wiring effectively isolates electrical components from the elements, leaving no base types or connections overlooked.
-
Chrome-plated stem virtually disappears inside the housing, blending perfectly with the factory reflector.
-
Optional Sealed passthrough wiring harness for applications with covers on the back of the headlight.
WHAT COLOR TEMPERATURE SHOULD I GET?
5K and 6K color temperatures are most suitable for roadway use and provide ideal conditions for the human eye: Drivers enjoy greater contrast and tire less quickly. Along with their high-efficiency level, LED headlights also offer significant benefits in terms of safety and comfort. 6K light resembles daylight and hardly causes eye fatigue – especially in the dark and adverse weather conditions. In addition, LED headlights offer a longer visual range than xenon headlights.
Because both 5K and 6K perform extremely well, it ultimately comes down to personal preference. 6K has a slight blue tone and a more modern or high-end look, whereas 5K offers a clean white look without any warm tones.
PRODUCT DIMENSIONS
Warranty
This product comes with a 3-year warranty supported by VLEDS. We do not require the product to be shipped back to us. Improper product installation, as well as any system components or wiring modifications, will void all warranties. See our full Warranty Details for more details.
What's Included
2X - V35 Monochrome Series DLR Bulbs
2X - PWM DRL Switcher
1X - Power Harness
1X - 5A Fuse Holder
2X - M6 Bolts
1X - 15ft 1/4" Split Loom
6X - 6" Zip Ties
FREQUENTLY BOUGHT TOGETHER
-
-
V25 MONOCHROME SERIES DUAL COLOR WHITE / YELLOW 9005 9006 H10 9145 9140As low as $140.00 PER PAIR -
-
50 LED HIGH VISIBILITY AMBER 3157 3157CK 3156 + RESISTORSAs low as $110.00
PER PAIR
| Base Number | 9005 |
|---|---|
| Series | V35 Monochrome |
| Output (Each) | 400LM LOW 3500LM HIGH |
| Current Draw @ 14.4V | 3.8A |
| Operating Voltage | 8-18V |
| Light Source | HP 3570 |
| Driver Style | Constant Current |
| Dimensions | 35mm Diameter |
| Contact Material | Nickel Plated |
UNIVERSAL PWM DRL INSTALLATION INSTRUCTIONS
ESTIMATED TIME TO INSTALL
- 15-20 MINUTES
TOOLS REQUIRED
- 10MM Socket
- 12MM Socket
- Ratchet Wrench
- Wire Cutters
DOWNLOAD
INSTALLATION GUIDE
1. Remove the factory high beam bulbs on the inner portion of the headlight.
2. Locate suitable chassis ground on driver side and loosen bolt. Attach the ring terminal on the first PWM Switcher to this location. Retighten the bolt.
3. Locate chassis ground on the passenger side. Attach the ring terminal from the second PWM Switcher.
4. Connect the input side of the PWM Switcher to the factory wiring as shown.
5. Note that the plug covered by a black vinyl cap is NOT used for this kit.
6. Install the V35 Monochrome DRL bulb into the factory high beam location and plug into the output of the PWM Switcher. Repeat this on the passenger side. (Optional) If the high beam bulb has a dust cap drill a 1" hole in the cap and install the Passthrough Harness.
7. Loosen the side nut on the positive battery terminal. Connect the ring terminal from the fuse holder to the terminal and tighten the nut.
8. Connect the bullet connector to the splitter harness. Push until it fully seats into the mating end.
9. Slide the seals over each other to protect the connection.
10. Connect the short wire of the splitter harness to the driver side PWM Switcher.
11. Loosely route the long wire of the splitter harness to the passenger side and connect to the PWM Switcher. Make sure the wire is clear of the radiator fan before starting the vehicle.
12. Test to confirm functionality. Make sure the DRL switch on the headlight stock is on and the engine is running. Both lights should light up dimly in DRL mode. Confirm the high beam works as well.
13. If a bulb does not turn on, flip the input plug to the PWM Switcher. Do this while the engine is running and DRLs are active.
14. Once functionality has been confirmed, use the provided split loom to cover all exposed wires. Start at the ground locations and cut to length, using zip ties to secure it.
15. Route the fuse holder behind the battery.
15. Installation complete! Enjoy your new DRLs and high beams!
© VLEDS INC.
Revision A | 10.18.24
Many online retailers sell standard off-the-shelf LED products, and the options can be overwhelming. Here are ten reasons you can trust us with your LED lighting needs.
1. Our Brand
We design and develop our products in-house. We are not a traditional reseller. We employ designers, mechanical engineers, and electrical engineers. Fitment, color, performance, and reliability are essential, allowing us to provide you with the best products possible.
We accept PayPal, Affirm, and all major credit cards.
2. Established Company
We've been in business for 19 years and have built an excellent reputation among automotive lighting enthusiasts. We are trusted and recommended by car and truck guys worldwide.
Life gets busy, so you've got time with our 60-day return policy.
3. Excellent Customer Service and Technical Support
We pride ourselves on offering first-class support to our customers. When you call or email us, you're talking to a person with years of knowledge and experience in the industry.
Same-day processing of replacement item by 2 pm PST. You are not required to ship the item back to us. See details HERE.
4. 25+ Years Combined Experience
Our staff is extremely knowledgeable and works firsthand with our products, from concept to installation. They know the ins and outs of every product we sell.
We make an LED replacement for nearly every bulb on your vehicle. We have several options and price points in many categories to meet your needs. Everyone has different tastes in color, so we offer up to 3 different kelvin ratings in our white LEDs, whereas the other guys only offer one.
5. Low-Cost, Flat-Rate Shipping
We have a fast, efficient pick-and-pack system with barcode scanning. Your order will be accurate and well-packaged for safe delivery to your door. Our shipping team provides you with order communication every step of the way.
Designed with the user in mind:
-
Simple navigation with a year make model bulb finder ensures you get the right part for your application
-
Clear and quality product photos so you know exactly what you're getting
-
Informational product descriptions
-
Specs and data on nearly every product
-
Install guides for the more complicated items
